Shop
This is where you can browse products in this store.
1145CRV – Shower rod
1146 – Coat hook
1147 – Coat hook
1150 – Safety Coat Hook
1144-501L – Curtain hooks
$7.00Shower curtain hooks, 12 in a pack, stainless steel. Designed for use with Frost’s shower rods and shower curtains. Industrial strenth for use in commercial settings.
Specifications:
HTS Code: 8302.41.6050
UPC Code: 624622114411
Freight Class: 65
Cubic Feet Volume: 0
Country of Origin: Taiwan
Brand: Frost Products
Product Group: Curtain hooks
Feature 1: Shower curtain hooks are stainless steel and come in a pack of 12.
Feature 2: Designed for use with code 1144-503 or 1144-502 shower curtains and 1145 series shower rods
Feature 3: Industrial strength
1145CRV – Shower rod
$49.00Curved shower rod provides elegant and practical use of space in a shower curtain enclosure. Die cast brushed finish on all hardware components. 1” diameter stainless steel rod in brushed finish. Assemble curved shower rod. Hand tighten retaining screws.
Do not tighten set screws at this time. Measuring Placement: Hold rod up to desired position, one person at each end, to check height and location. Be sure that rod is level. With a pencil lightly trace the top and bottom of the wall plate. Set rod down. Remove retaining screws. Separate the wall plates from the rod.
Leave swivel connectors on the rod. Place wall plates back on the wall at pencil marks. Mark screw holes at 12 and 6 o’clock positions. Set wall plate aside. Read anchor instructions carefully. Drill screw holes as marked. Install 4 anchors unless a hole is on a stud. Mount wall plates, Screw in to anchors.
Place rod, with swivel connectors attached and set screw holes facing up into wall plates. Screw in retaining screws. Tighten. Adjust rod. Be sure that each end of rod is into the connector far enough to engage set screws and make solid contact. Tighten set screws with allen wrench.
Specifications:
HTS Code: 8302.41.90.90
UPC Code: 624622114503
Freight Class: 300
Cubic Feet Volume: 0.89
Country of Origin: Taiwan
Brand: Frost Products
Product Group: Shower rod
Feature 1: Stainless Shower rod, brushed finish, for standard 60” tub.
Feature 2: Die cast brushed finish on all hardware components. 1” diameter stainless steel rod in brushed finish.
Feature 3: Provides elegant and practical use of space in a shower curtain enclosure.
1146B – Coat hook with bumper
$16.00Coat hooks are fabricated from 12 gauge (.1″) thick solid stainless steel. Comes with rubber bumper on the hook end. Hook ends are 1″ (2.54) radius with all edges deburred. These coat hooks are designed for commercial or industrial usage.
Specifications:
HTS Code: 7324.90.00.00
UPC Code: 624622114619
Master UPC: 60624622114611
Freight Class: 70
Cubic Feet Volume: 0.03
Country of Origin: Canada
Brand: Frost Products
Product Group: Coat hook
Feature 1: Stainless Steel, single hook with rubber bumper
Feature 2: 12 gauge (.1″) thick solid stainless steel.
Feature 3: Hook ends are 1″ (2.54) radius with all edges deburred.
1146 – Coat hook
$15.00Coat hooks are fabricated from 12 gauge (.1″) thick solid stainless steel. Hook ends are 1″ (2.54) radius with all edges deburred. These coat hooks are designed for commercial or industrial usage.
Specifications:
HTS Code: 7324.90.00.00
UPC Code: 624622114602
Master UPC: 60624622114604
Freight Class: 70
Cubic Feet Volume: 0.03
Country of Origin: Canada
Brand: Frost Products
Product Group: Coat hook
Feature 1: Stainless Steel, single hook
Feature 2: 12 gauge (.1″) thick solid stainless steel.
Feature 3: Hook ends are 1″ (2.54) radius with all edges deburred.
1147 – Coat hook
$90.00This product is a three hook strip. Coat hooks are fabricated from 12 gauge (.1″) thick solid stainless steel. Hook ends are 1″ (2.54) radius with all edges deburred. These coat hooks are designed for commercial or industrial usage.
Specifications:
HTS Code: 7324.90.00.00
UPC Code: 624622114701
Freight Class: 110
Cubic Feet Volume: 0.3
Country of Origin: Canada
Brand: Frost Products
Product Group: Coat hook
Feature 1: Stainless Steel, three hook strip
Feature 2: Coat hooks are fabricated from 12 gauge (.1″) thick solid stainless steel.
Feature 3: Hook ends are 1″ (2.54) radius with all edges deburred.
1150 – Safety Coat Hook
$30.00Safety coat hook designed to collaspe given appropriate level of pressure. Perfect for use in schools, recreational facilities, and other areas that have safety concerns. All stainless steel type 304 # 4 finish. Hook is epoxy coated 16 ga.
stainless steel, providing a smooth burr free edge. Spring loaded coat hook will only support weight of coat or jacket, heavier objects will slip off. Collapsible coat hook will not support loads in excess of 11 kilograms (25 lbs.)Specifications:
HTS Code: 7324.90.00.00
UPC Code: 624622115005
Master UPC: 60624622115007
Freight Class: 60
Cubic Feet Volume: 0.02
Country of Origin: Canada
Brand: Frost Products
Product Group: Coat hook
Feature 1: All stainless steel type 304 # 4 finish. Hook is epoxy coated 16 ga. stainless steel, providing a smooth burr free edge.
Feature 2: Spring loaded coat hook will only support weight of coat or jacket, heavier objects will slip off. Collapsible coat hook will not support loads in excess of 11 kilograms (25 lbs.)
Feature 3: Perfect for us in schools and recreation facilities
Showing 319–324 of 750 items